The highest-horsepower head board Bojie makes — for 4-head I3200 production machines. The Hoson I3200 4H carriage board version 1.24 drives four I3200-A1 printheads simultaneously. This board is the nerve center of any high-output 60cm+ DTF setup. When it goes down, all four heads go with it. Replacing both heads when a board fails is the most expensive mistake shops make — check the board first.
Compatible With
- 4-head (4H) I3200 DTF printers using Hoson electronics
- High-production 60cm wide-format I3200 machines
- Printers running Hoson mainboard V2.75 or V3.74
- Confirm your board version before ordering — 4H boards are not interchangeable with 2H
Specifications
- Model: Hoson I3200 carriage board — 4H (quad head)
- Version: V1.24 (also compatible with V1.23)
- Heads supported: 4× I3200-A1 printheads
- Interface: 14-pin ribbon cable connectors (×4)
- Connection: Network/TCP-IP mainboard interface
- Quantity: 1 board
Signs Your 4H Board Is Failing
- All 4 heads stop firing at the same time
- Error codes that persist after printhead replacement
- Inconsistent voltage readings at head connectors
- Board shows burn marks, swollen capacitors, or damaged traces
- Print quality suddenly degrades uniformly across all 4 channels
Pro Tips from the Shop Floor
A shorted printhead cable is the #1 cause of carriage board failure. Before installing a new board, test each cable — one bad cable can blow the new board within minutes of powering on. We stock I3200 14-pin cables. Check them first.
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.