The Hoson I3200 carriage board is the brain behind your dual-head I3200 DTF printer. This board — version 1.43 for 2-head setups — manages all communication between your mainboard and the I3200 printheads. Board failures often get misdiagnosed as printhead failures, costing shops hundreds of dollars in unnecessary head replacements. If both heads stopped working at the same time, the board is usually the culprit, not both heads.
Compatible With
- Dual-head (2H) I3200 DTF printers using Hoson electronics
- 60cm and 44cm I3200 dual-head Chinese DTF machines
- Printers running Hoson mainboard V2.75 or V3.74
- Confirm board version against your existing board before ordering
Specifications
- Model: Hoson I3200 carriage board — 2H (dual head)
- Version: V1.43 (also compatible with V1.42)
- Heads supported: 2× I3200-A1 printheads
- Interface: 14-pin ribbon cable connectors (×2)
- Quantity: 1 board
Signs Your Carriage Board Is Failing
- Both I3200 heads stop firing simultaneously
- Error codes that persist after printhead replacement
- One or both heads show no voltage at the connector
- Board shows visible burn marks, bulging capacitors, or damaged traces
Pro Tips from the Shop Floor
Before ordering a new board, replace your printhead cables first — a shorted cable can damage a board and a bad board can blow a new cable. Check cables first, then board. We stock both.
US shipping is a $4.99 flat rate per order (USPS Ground Advantage with tracking), or pick up free at our Avondale, AZ shop. Most orders ship in 1–2 business days. See shipping & turnaround for details.
If your order arrives damaged or defective, contact us within 3 days of delivery with your order number and photos and we'll make it right. See our refund policy for full details.