One of the first parts to fail — and one of the easiest to fix. The capping station pad keeps your XP600 printhead nozzles sealed, wet, and protected when the printer is idle. When this pad wears out or loses suction, your printer will stop priming correctly and nozzle checks will show gaps or missing channels.
Compatible With
- Procolored P13 DTF Printer
- Procolored F13 Pro / F13 Pro Gen-2 (dual head — 2 capping stations per printer)
- All XP600 printhead DTF printers (single and dual head)
- TX800 printhead printers
- XP600-based UV DTF printers
Specifications
- Type: Capping station pad / cap-top
- Quantity: 1 unit
- Compatibility: XP600 / TX800 printhead
- Replacement interval: Every 4–6 months under production use
Signs Your Cap-Top Needs Replacing
- Printer runs cleaning cycles but ink doesn't move
- Nozzle check shows random missing lines that don't recover
- Ink flooding or pooling under the printhead
- Cracked or warped rubber rim visible on inspection
- Pump is "sucking air" (bubbles visible in waste tubes during clean)
Pro Tips from the Shop Floor
Always replace the wiper blade when you replace the cap-top — a dirty wiper drags contaminated ink onto the fresh cap seal. Procolored F13 Pro owners: your dual-head setup has two capping stations — replace both at the same time so maintenance stays in sync.
US shipping is a $4.99 flat rate per order (USPS Ground Advantage with tracking), or pick up free at our Avondale, AZ shop. Most orders ship in 1–2 business days. See shipping & turnaround for details.
If your order arrives damaged or defective, contact us within 3 days of delivery with your order number and photos and we'll make it right. See our refund policy for full details.